M.W. : 384
CAS : 971-15-3
EINECS : 213-537-2
NURCHEM DPTT-75 is the most active thiuram.
It is an effective primary or secondary accelerator or sulphur donor for use in IIR, EPDM, NR, IR, SBR, CR, CSM, and particularly for NBR. For CSM, DPTT should be used together with MBTS to furnish higher safety in blending procedure. It also yields white rubber with excellent resistance against weathering. With NR and synthetic rubbers it vulcanises without sulphur at low temperatures and leads to products with good physical properties and superb resistance against ageing.
NURCHEM DPTT-75 is effective at low and high temperatures. It is particularly suitable for light-coloured stocks.
TYPICAL VALUES :
Melting Point：145 oC
Heating Loss：≤0.3 %
Residue on 63μm
Products requiring ageing resistance, high heat resistant goods, hoses, profiles, CSM products (rubber-coated fabrics, goods for industrial use, cable and wire,…) etc.
Mooney ML(1+4) 50°C
SAFETY & TOXICITY :
For detailed information, please refer to our Material Safety Data Sheet. Nitrosamine free
PACKAGING & STORAGE :
25 kg(net) Carton. 600 kg (net)/ pallet.
Shelf-life : 2 years in its original packaging
Store in a dry and cool place and away from direct sources of heat or sunlight.
Compared to a traditional EVM/EP(D)M binder, NURCHEM DPTT-75 allows :
l Dust free products with a high level of filtration up to 38 μ.
l Tack free products at room temperature.
l Lower Mooney viscosity, improving quality of dispersion.
l Scrap rate reduction thanks to filtration.
l Wider compatibility with other elastomers.