Nanjing Union Rubber and Chemicals Co., Ltd.

Subscriptions

Get mail on new products



Contact us

  • Address: 20N, Building B, New World Center, 88# Zhujiang Rd. Nanjing,210008
  • Contact Person: Mr. Fan
  • Tel: 86-25-84462798
  • Fax: 86-25-84463798
  • E-Mail: admin@nurchem.com

Rubber Accelerator MBT NURCHEM MBT(M)

Rubber Accelerator MBT NURCHEM MBT(M)
Item Code:NURCHEM MBT(M) Features:MBT can be used as a fast,non-staining accelerator for both dry rubber and latex applications. Low temperature curing can be acheived by the use of TMTD, TETD or DPG as secondary accelerators. MBT confers excellent aging charateristics to vulcanizates.
  • Description
 
CHEMICAL NAME: 2-Mercaptobenzothiazole
CAS NO.: 149-30-4
 
MBT can be used as a fast, non-staining accelerator for both dry rubber and latex applications. Low temperature curing can be achieved by the use of TMTD, TETD or DPG as secondary accelerators. MBT confers excellent aging characteristics to vulcanizates.
 
Product Form
Pdr
Pdr-o
Grs-2mm
PRODUCT SPECIFICATIONS
 
 
 
Appearance:
 
Light-yellowish Powder
Light-yellowish Powder
Light-yellowish Granular
Melting Point Initial
(℃) min.
171.0
171.0
171.0
Heating Loss
(%) max.
0.4
0.4
0.4
Ash
(%) max.
0.3
0.3
0.3
Oil Content
(%)
--
1.0-2.0
--
Strength
(N)
--
--
0.8-3.0
Residue on 150μm sieve
(%) max.
0.1
0.1
 
TYPICAL PROPERTIES
 
 
 
 
Density at 20℃
Kg/m3
1420--1520
PACKAGING:
 
 
Bag:
 
25kg
 
 
Or other kind of package clients need

Other Products

Product Name:
Rubber Accelerator MBTS
Model:
NURCHEM MBTS
Description:
MBTS, gives flat, moderately fast cures in nature and synthetic rubber. Also used in a wide range of general purpose rubbers. Non-staining/non-discoloring in “white” stock; act as a plasticizer/retarder in polychloroprene rubber. Secondary acceleration is usually required for synthetic polymers. Exhibits better scorch safety than MBT.
Product Name:
Rubber Acclerator ZMBT(MZ, MBZ, GZ.ZM)
Model:
NURCHEM ZMBT
Description:
ZMBT finds its main application in latex where it is used as a primary accelerator in combination with ZDMC or ZDEC. Latex films cured with ZMBT have a markedly higher modulus. Furthermore a better compression set resistance in latex foam can be achieved, without increasing the cure time. ZMBT does not destabilize latex formulations. In dry rubber applications, the performance of ZMBT is almost similar to MBT with slight scorch improvement.
more
  • Address: 20N, Building B, New World Center, 88# Zhujiang Rd. Nanjing,210008
  • Contact Person: Mr. Fan