Rubber Accelerators

Product Name:

Model:

Description:

MBT can be used as a fast,non-staining accelerator for both dry rubber and latex applications. Low temperature curing can be acheived by the use of TMTD, TETD or DPG as secondary accelerators. MBT confers excellent aging charateristics to vulcanizates.

Product Name:

Rubber Acclerator ZMBT(MZ, MBZ, GZ.ZM)

Model:

NURCHEM ZMBT

Description:

ZMBT finds its main application in latex where it is used as a primary accelerator in combination with ZDMC or ZDEC. Latex films cured with ZMBT have a markedly higher modulus. Furthermore a better compression set resistance in latex foam can be achieved, without increasing the cure time. ZMBT does not destabilize latex formulations. In dry rubber applications, the performance of ZMBT is almost similar to MBT with slight scorch improvement.

Product Name:

Rubber Accelerator CBS (CZ)

Model:

NURCHEM CBS

Description:

CHEMICAL NAME: N-Cyclohexyl-2-Benzothiazolesulfenamide CAS NO.: 95-33-0 CZ is a primary amino based accelerator giving good scorch safety, a fast cure and good modulus development in a variety of general purpose polymers. It is the most active sulfenamide in EPDM

Product Name:

Rubber Accelerator NOBS (MBS, MOR)

Model:

NURCHEM NOBS

Description:

MBS provides extended scorch safety and good green stock storage stability compared to CBS or TBBS. It is recommended for applications where extended scorch safety is required such as thick extrusions. Stock with high loading of furnace blacks such as ISAF and SAF. Its long scorch delay is also advantageous in injection or transfer molding operations.

Product Name:

Rubber Accelerator TBBS (NS)

Model:

NURCHEM TBBS

Description:

Provides fast cure and high modules development in NR SBR BR and blends. Normally used alone or with small quantities of ultra accelerators in tire compounds or industrial rubber products. Can be used to effectively replace MBTS/DPG systems TBBS may give equal modulus to CBS or MBS when used as a 10% lower level.

Product Name:

Rubber Accelerator OTOS

Model:

NURCHEM OTOS

Description:

Delayed-action primary accelerator and scorch-modifying secondary accelerator.

Product Name:

Rubber Accelerator ZDEC (ZDC, EZ, )

Model:

NURCHEM ZDEC

Description:

ZDEC is a fast curing primary or secondary accelerator for NR, SBR, EPDM. ZDEC is used in both natural and synthetic latex. Furthermore it is an antioxidant in adhesive systems.

Product Name:

Rubber Accelerator ZDBC (BZ)

Model:

NURCHEM ZDBC

Description:

ZDBC is a primary or secondary accelerator in NR, SBR. IIR or EPDM. ZDMC is used in both natural and synthetic latex for faster curing than with ZDEC or ZDMC. Furthermore, it is an antioxidant in rubber-based adhesive systems.

Product Name:

Rubber Accelerator ZDMC (PZ)

Model:

NURCHEM ZDMC

Description:

ZDMC is a fast curing accelerator for natural, synthetic rubber and latex. It can be used as accelerators of butyl rubber, acrylonitrile-butadiene rubber and EPDM rubber, non-toxic, inodorous, stainless and changeless in colors on products, suitable for coated fabric. It had wonderful effect in the products of EPDM rubber and butyl rubber.

Product Name:

Rubber Accelerator DDTS

Model:

NURCHEM DDTS

Description:

CHEMICAL NAME: N,N’-Dimethyl-N,N’-Diphenyl Thiuram Disulfide CAS NO.: 53880-86-7 Can be used as accelerator for rubber polymers like the natural glue, butylbenzene glue, butyronitrile glue, etc. Also can be used as the vulcanizing agent, Mainly uses in manufacturing the bright colored and light colored product, the rapid cure model product, the flat belt, the conveyor belt, the conveyer belt, the dip and dry product and the waterproof cloth and so on, The obtained product has long service life and good mechanical properties.